9/20/2023 0 Comments Yamaha scrambler![]() And the wheel, another 18-incher, also had a 7-inch brake, but with a single leading shoe. The rear swingarm had a pair of shocks with adjustments available for spring preload. All this sat securely in a tubular steel double-cradle frame, which looked remarkably like that on a race bike.Ī rather steep 34mm telescopic fork ran down to the 18-inch front wheel, where a 7-inch double-leading-shoe front brake did an excellent job of slowing things down. Smoothness was what the rider felt when going through the five gears. And rubber cushions in the hub helped reduce vibration. The oil capacity was three pints, which was good for half a dozen fill-ups of the 3-gallon gas tank.Ĭrankshaft power ran back the left side via helical gears to a seven plate clutch, blessed with six torsion springs that helped to absorb even the most abrupt of gear changes. This could diminish oil input when idling through town, and give it an almighty whack when the rider decided that a full-on accelerator rush down a country road was in order. The greatest advantage to Autolube was that it could closely regulate the amount of oil to be mixed with the gas, so instead of having a steady 20:l mixture, which could get quite smoky at times, the oil was metered by both engine speed and the opening of the throttle valves. It was being used on Yamaha’s race bikes in the late ’50s, and then adapted to street machines in the early ’60s. Yamaha was noted for having developed the Autolube system, using a separate container for oil rather than messily mixing it with gas in the tank. Two 26mm Mikuni VMC two-stroke carbs combined with Yamaha’s Autolube system fed the fuel/oil mixture into the crankcase. Road tests merely quoted the “claimed bhp.” Those 30 advertised horses were said to be generated at 7,500 rpm, and were certainly taken off the crankshaft rather than the rear wheel. Inside the engine were race-worthy bearings, though they would never be subjected to the 10,000-plus rpm attained by TDs. Naturally these new gaskets came from the racing TDs. Compression ratio was a reliable 7.3:1, and the cylinders now had copper head gaskets to replace the earlier aluminum ones–which had a tendency to fail when pushed very hard. The new for ’69 cylinders had three transfer ports, along with intake and exhaust, allowing for a larger fuel charge to find its way into the combustion chambers faster. This was a genuine five-porter, the ports being cast into the aluminum cylinders with cast iron liners. The DS6 246cc engine was of piston-port design, with the 56mm bore and 50mm stroke that had been around for 10 years. Ads for the DS6 promoted the TD’s Daytona wins in 19. ![]() Any time the engineers improved the racer, they would try to figure out a way to adapt whatever it was to the street bike. And what is good on the track can be tuned down to find its place on the street. Riders could thank Yamaha’s racing shop for improvements, as the company was intent on keeping its 250 riders on the podium. The history of the DS6 engine was long and had the distinct advantage of being associated with Yamaha’s racing 250, the TD1, which had great success over the previous decade. The chassis design was much more favorable to the street rather than the trail, so the high pipes were more a styling point rather than functional. This was styled as a dual-purpose machine–hence the C in the alpha numerology. And it passed the eye test as well, with high pipes, one on each side. When Yamaha advertised this quarter-liter as having 30 horsepower, interest was great. ![]() Any college student having a few bucks in his pocket could probably arrange time payments with the local dealer…backed by Dad’s signature. Running against this 250 DS6 were Suzuki’s Hustler and Kawasaki’s Samurai, all in the $600 range. ![]() Two-strokes were the popular engines for sporty bikes in the 1960s, being reasonably powerful and inexpensive to make. We have no idea what the DS stands for, but doubt that it has anything to do with the DS prefix used in Yamaha’s music department. ![]() Owner: Ed Heckman, Paso Robles, California.įor more than 10 years 250 two-stroke twins were the mainstay of the Yamaha range here in the United States, from the DS1 of 1959 (though not sold in the U.S. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |